Renaatus Procon Private Limited
Renaatus Procon Private Limited
Coimbatore, Tamil Nadu
SEND SMS
SEND EMAIL

Cement Adhesive

Pioneers in the industry, we offer cement based adhesive and renabond cement based adhesive from India.

Cement Based Adhesive

Cement Based Adhesive
  • Cement Based Adhesive
Get Best Quote
Approx. Price: Rs 600 / BagGet Latest Price

Product Details:

Thermal Conductivity0.122 W/mK
Compressive Strength3 N/mm2
Packing Size40 kg
Packing TypeBag
Sound Resistance37 - 42 dB
Dry Density550 - 650 kg/m3
BrandRenabond

Other Details:
  • AAC Joint Mortar
  • Quick work
  • Self curing

Method of Application:

  • Wet Renacon AAC blocks before applying Renabond Adhesive.
  • Apply the Renabond adhesive to the horizontal and vertical surfaces of the AAC blocks that will be adhered with a 5mm notched trowel.
  • The thickness of Renabond adhesive joint should be around 2-3 mm as per standards.
  • Place the concrete blocks appropriately by gently using a rubber mallet to secure the blocks into position.
  • Use a spirit level to check the level and alignment of blocks.
  • The mixed material should be used within 2 hours at 23 deg C and 50% relative humidity.
  • Remove the excess paste, if any instantly and the procedure for continuing the masonry work.
  • No curing is required further to application.
Request
Callback
Yes! I am Interested

Renabond Cement Based Adhesive

Renabond Cement Based Adhesive
  • Renabond Cement Based Adhesive
Get Best Quote
Approx. Price: Rs 600 / BagGet Latest Price

Product Details:

Minimum Order Quantity50 Bag
CuringNot required
Water Required25 - 30 %
AppearanceFree flowing and grey in colour
BrandRenabond
Pack TypeBag
Chemical CompositionPolyurethane
Pack Size (kilogram)40
Coverage65-70 sq.ft
Pot LifeApprox 30 minutes

Other Details:
  • AAC Joint Mortar
  • Quick work
  • Self curing

Features:

  • High bonding strength: Renabond adhesive which made up of highly formulated polymers gives good bonding strength between the blocks which suits for both load bearing and framed structure constructions.
  • Higher Coverage: Renabond AAC joint mortar covers up to 70 sqft , considering the thickness of the mortar 2-3 mm.
  • Cost savings: Renabond an ready to use AAC joint mortar, saves money in way of transportation & sieving of sand labour cost.
  • Less Mortar required: Unless like conventional cement mortar where 10-12 mm thickness of mortar required to lay between the red bricks, Renabond requires only 2-3 mm thickness of mortar.
  • No Wastage: We going to use the AAC block laying special trowel tool to paste the renabond between two blocks, so no wastage of mortar in this case of application.
  • No Curing: The self-curing properties of renabond adhesive leaves no curing after application, thus water is saved.

Application Methodology:
  • Ready to mix: Renabond the Ready to use adhesive can be used just by adding water at the prescribed ratio.
  • Cleaning the Renacon AAC block: Before laying the AAC block, the side layers of the block should be made wet with soft sponge.
  • Laying the ¿¿¿rst line: The ¿¿¿rst line of AAC block need to be done by conventional method for better result.
  • From Second layer: After the laying the ¿¿¿rst level, from second layer renabond should be applied both horizontally and vertically with special trowel with 2-3 mm thickness.

General note: After laying AAC block for 4 feet , it is recommended to do sill concrete for every 4 feet to get best bonding, strength and avoid cracks in future.
Request
Callback
Yes! I am Interested
X

Explore more products



Reach Us
Sree Kala S (Sr. Executive)
B. O. S. No. 26, Sri Ram Avenue, 100 Feet Extension
Coimbatore- 641037, Tamil Nadu, India



Call Us

Share Us

F GT L


Send E-mailSend SMS