Brick Joint Mortar

Product Details:

Renafix Brick Joint Mortar is a semi premix high quality mortar for jointing and bonding of AAC blocks, concrete blocks, hollow blocks, red bricks and fly ash bricks.

Renafix Brick Joint Mortar premix consists of cement graded sand and specialized polymers which combine to give superior strength, water retention and stability. It replaces the conventional method and material of jointing mortar which requires a 12-18 mm thickness with revolutionary 2-3 mm joint thickness. Renafix Brick Joint Mortar only requires addition of water before application to prepare the product for use, reducing the hassle of measuring and maintaining various individual elements to create a conventional mortar.

Product Details:

Renafix Cement Mortar is a construction grade mortar mix designed for laying all kind of Brick Masonry. Renafix Cement Mortar mix is a pre-blended, sanded product. Mortar Mix is highly workable and cohesive, with a long board life and it is pre-bagged ready for use and only requires the addition of clean water.

Features:

• Ready to use
• Quick construction
• Excellent workability
• High bond formation
• Flexible/Self healing
• Minimal wastage
• Good Crack resistance

Installation:
Surfaces to receive Mortar Mix should be clean and free of dirt, loose debris, grease, oil, etc., for the best possible bond. Add 7-8 Litres of clean water into 50 kg of Renafix Cement Mortar mix in a container/bowl and mix well until reach to the workable condition. If required add additional water to reach required workability and consistency of wet mortar mix. Apply a full bed of mortar onto the base, approximately 1/2 inch to 3/4 inch (12 mm to 18 mm) thickness. Push downward into the mortar bed and sideways against the previously laid block with a slight twisting motion. Tool the mortar joints when they become thumbprint hard. This will make the mortar joint watertight and provide a neat appearance. Cure the wall with water into two times for 5 -7 days then allow for plastering.