Renaatus Procon Private Limited
Renaatus Procon Private Limited
Coimbatore, Tamil Nadu
SEND SMS
SEND EMAIL

Renafix - Tile Adhesive

Manufacturer of a wide range of products which include 40kg renafix tile adhesive, renafix 211 tile adhesive, renabond cement based adhesive, renafix 222 tile adhesive, renafix 201 tile adhesive and floor tile adhesive.

40kg Renafix Tile Adhesive

40kg Renafix Tile Adhesive
  • 40kg Renafix Tile Adhesive
Get Best Quote
Approx. Price: Rs 300 / BagGet Latest Price

Product Details:

ApplicationTile Fixing
BrandRenafix
Packaging Size40 kg
Bulk Density1.2 - 1.6 Kg/litre
FormPowder
Compressive StrengthMore than 9 in 28 days
Water RetentivityMin 95% (EN 1015-8)
Maximum Aggregate SizeLess than 3.5 mm

As a significant entity of this domain, we render the handpicked quality of 40kg Reenafix Tile Adhesive. For the purpose of fixing exterior and interior tiles, the offered adhesives are used. Processed as per the construction industry laid norms, the thin layer of the adhesive is sufficient for jointing of wall surfaces. Due to its excellent bonding capacity and high strength, the offered adhesive is highly demanded.

Other Details:
  • Perfect fix for a superior floor

Method of Application:
  • Wet the back side of the tile with water.
  • Complete immersion of water is not required
  • Clean the surface of the tile with clean water immediately after laying with wet sponge
  • Add water with renafix to form a thick paste.
  • Renafix tile adhesive need to be spread it on the leveled base mortar
  • After applying give the smooth surface on the tile backside.
  • Install ready skirting with continuous joint on the applied floor.
  • Preferably with the use of rubber squeeze or rubber sheet.
  • Do not apply the pointing material all over the surface.
  • Clean the surface of the tile with a clean wet sponge, removing the excess pigment on the tile surface.
Request
Callback
Yes! I am Interested

Renafix 211 Tile Adhesive

Renafix 211 Tile Adhesive
  • Renafix 211 Tile Adhesive
Get Best Quote
Approx. Price: Rs 305 / BagGet Latest Price

Product Details:

BrandRenafix
Packaging Size20kg
FormPowder
Packaging Typebag
Coverage AreaApprox 50-60 sqft per 20kg bag with 1/4" x 1/4" (6mm x 6mm) square notched trowel
Thickness3 mm
Model Name/Number211
Density1.6 Kg/L
Water Demand5 - 6 Litres / 20 kg bag(MPa)

Renafix 211 Thin set tile adhesive is a multi-purpose, polymer modified premium floor & wall thin set powder offering vast utility including application of tiles and stones on interior floor & wall installations. It is a cementetious thin set powder to be mixed only with water to install various types of tiles & stone on variety of substrates using thin set method of installation.

Advantages:
  • Single component, just add water
  • Dual use for floor and wall
  • High bond strength
  • Economical & Easy to use
  • Increased Flexibility
  • Bonds to various substrates
  • Exceeds EN12004 / ISO13007, ANSI 118.1 – 1999

Suitable Substrates:
  • Concrete
  • Concrete Masonry Cement Mortar Beds
  • Cementetious Plaster and render
  • Brick Masonry
  • Cement Terrazzo

Working Properties:
  • Open Time – 20 minutes at 27 deg C
  • Good Pot Life – 3 hr at 27 deg C
  • Time to Heavy traffic – 24 hrs

Installation:
  • Surface Preparation –Surfaces should be structurally sound, clean and free of all dirt, oil, grease, loose peeling paint, laitance, concrete sealers or curing compounds. Dry, dusty concrete slabs or masonry should be dampened and excess water swept off.
  • Mixing –Place clean, potable water into a clean pail. Add thin set powder into the pail. Use approximately 5 – 6L of water for 20 kg of powder. Mix by hand or with a slow speed mixer to a smooth, trowel able consistency. Allow adhesive to slake for 5-10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel.
  • Application –Apply adhesive to the substrate with the flat side of the trowel, pressing firmly to work into surface. Comb on additional adhesive with the notched side. Use the proper sized notched trowel to ensure full bedding of the tile. Spread as much adhesive as can be covered with tile in 10 minutes. Back butter large tiles (> 12”x12”) to provide full bedding and firm support. Place tiles into the wet, sticky adhesive and beat in using a beating block and rubber mallet to embed tile and adjust the level. Check adhesive for complete coverage by periodically removing a tile and inspecting bedding adhesive transfer onto back of the tile. If adhesive is skinned over (not sticky), remove and replace with fresh adhesive. It is recommended to use spacers to create joints between tiles and subsequently fill the joints with Renafix tile grout.
  • Cleaning –Clean all tools and application equipment with water immediately after use. Hardened/cured material can only be removed mechanically.

Cautions:
  • Health & Safety Information
  • During cold weather, protect finished work from traffic until fully cured.
  • Contains Portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water.
  • Do not take internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas.
  • Keep out of reach of children.

Technical Data:
  • Shear Bond, Porcelain tile 28 day cure test by ANSI A118.4 – 1999:F-5.2.4 >256 psi(1.5 MPa)
  • Shear Bond, Porcelain tile Water Immersion test by ANSI A118.4 – 1999:F-5.2.3 >165 psi(1.1 MPa)
  • Compressive Strength test by ANSI A118.4 – 1999:F-6.1 (Modified) >2550 psi(17.5 MPa)
Request
Callback
Yes! I am Interested

Renabond Cement Based Adhesive

Renabond Cement Based Adhesive
  • Renabond Cement Based Adhesive
Get Best Quote
Approx. Price: Rs 690 / BagGet Latest Price

Product Details:

Packaging Size40kg
Pack TypeBag
Chemical CompositionPolyurethane
Pack Size (kilogram)40kg
Coverage65-70 sq.ft
Pot LifeApprox 30 minutes
BrandRenabond
CuringNot required
Water Required25 - 30 %
AppearanceFree flowing and grey in colour

Other Details:
  • AAC Joint Mortar
  • Quick work
  • Self curing

Features:

  • High bonding strength: Renabond adhesive which made up of highly formulated polymers gives good bonding strength between the blocks which suits for both load bearing and framed structure constructions.
  • Higher Coverage: Renabond AAC joint mortar covers up to 70 sqft , considering the thickness of the mortar 2-3 mm.
  • Cost savings: Renabond an ready to use AAC joint mortar, saves money in way of transportation & sieving of sand labour cost.
  • Less Mortar required: Unless like conventional cement mortar where 10-12 mm thickness of mortar required to lay between the red bricks, Renabond requires only 2-3 mm thickness of mortar.
  • No Wastage: We going to use the AAC block laying special trowel tool to paste the renabond between two blocks, so no wastage of mortar in this case of application.
  • No Curing: The self-curing properties of renabond adhesive leaves no curing after application, thus water is saved.

Application Methodology:
  • Ready to mix: Renabond the Ready to use adhesive can be used just by adding water at the prescribed ratio.
  • Cleaning the Renacon AAC block: Before laying the AAC block, the side layers of the block should be made wet with soft sponge.
  • Laying the first line: The first line of AAC block need to be done by conventional method for better result.
  • From Second layer: After the laying the first level, from second layer renabond should be applied both horizontally and vertically with special trowel with 2-3 mm thickness.

General note: After laying AAC block for 4 feet , it is recommended to do sill concrete for every 4 feet to get best bonding, strength and avoid cracks in future.
Request
Callback
Yes! I am Interested

Renafix 222 Tile Adhesive

Renafix 222 Tile Adhesive
  • Renafix 222 Tile Adhesive
Get Best Quote
Approx. Price: Rs 400 / BagGet Latest Price

Product Details:

BrandRenafix
Packaging Size20kg
FormPowder
Packaging TypeBag
Coverage AreaApprox 50-60 sqft per 20kg bag with 1/4" x 1/4" (6mm x 6mm) square notched trowel
Model Name/Number222
Density1.6 Kg/L
Water Demand4 - 5 Litres / 20 kg bag (MPa)
Minimum Thickness3 mm

Renafix 222 Thin set tile adhesive is a multi-purpose, polymer modified thin set powder offering vast utility including applications on interior floor & wall as well as limited exterior* floor & wall installations, It is a cementetious thin set powder to be mixed only with water to install various types of tiles & stone on variety of substrates using thin set method of installation.

Advantages:
  • Single component, just add water
  • High strength, polymer modified
  • Economical & Easy to use
  • Bonds to various substrates
  • Exceeds EN12004 / ISO13007 for C2TES1 and exceeds ANSI 118.4
  • Classification
  • Suited for demanding external application

Suitable Substrates:
  • Concrete
  • Concrete Masonry Cement Mortar Beds
  • Cementetious Plaster and render
  • Tile and Stone
  • Brick Masonry
  • Cement Terrazzo

Working Properties:
  • Single Component
  • Extended Open Time up to 30 minutes at 27 deg C
  • Good Pot Life up to 2 hr 30 minutes at 27 deg C
  • Excellent adhesion
  • High bond strength
  • Flexible
  • Ready to use

Installation:
  • Surface Preparation –Surfaces should be structurally sound, clean and free of all dirt, oil, grease, loose peeling paint, laitance, concrete sealers or curing compounds. Dry, dusty concrete slabs or masonry should be dampened and excess water swept off.
  • Mixing –Place clean, potable water into a clean pail. Add thin set powder into the pail. Use approximately 5 – 6L of water for 20 kg of powder. Mix by hand or with a slow speed mixer to a smooth, trowel able consistency. Allow adhesive to slake for 5-10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel.
  • Application –Apply adhesive to the substrate with the flat side of the trowel, pressing firmly to work into surface. Comb on additional adhesive with the notched side. Use the proper sized notched trowel to ensure full bedding of the tile. Spread as much adhesive as can be covered with tile in 10 minutes. Back butter large tiles (> 12”x12”) to provide full bedding and firm support. Place tiles into the wet, sticky adhesive and beat in using a beating block and rubber mallet to embed tile and adjust the level. Check adhesive for complete coverage by periodically removing a tile and inspecting bedding adhesive transfer onto back of the tile. If adhesive is skinned over (not sticky), remove and replace with fresh adhesive. It is recommended to use spacers to create joints between tiles and subsequently fill the joints with Renafix tile grout.
  • Cleaning –Clean all tools and application equipment with water immediately after use. Hardened/cured material can only be removed mechanically.

Cautions:
  • Health & Safety Information
  • During cold weather, protect finished work from traffic until fully cured.
  • Contains Portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water.
  • Do not take internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas.
  • Keep out of reach of children.

Technical Data:
  • Shear Bond, Porcelain tile 28 day cure test by ANSI A118.4 – 1999:F-5.2.3 >300 psi(1.8 MPa)
  • Shear Bond, Porcelain tile Water Immersion test by ANSI A118.4 – 1999:F-5.2.3 >190 psi(1.5 MPa)
  • Compressive Strength test by ANSI A118.4 – 1999:F-6.1 (Modified) >2750 psi(20.1 MPa)
Request
Callback
Yes! I am Interested

Renafix 201 Tile Adhesive

Renafix 201 Tile Adhesive
  • Renafix 201 Tile Adhesive
Get Best Quote
Approx. Price: Rs 255 / BagGet Latest Price

Product Details:

BrandRenafix
Packaging Size20kg
Model Name/Number201
Density.6 Kg/L
Water Demand5 - 6 Litres / 20 kg bag (MPa)
Minimum Thickness3 mm
Coverage Area50-60 sqft per 20kg bag with 1/4" x 1/4" (6mm x 6mm) square notched trowel

Renafix 201 Thin set tile adhesive is a superior floor thin set powder for applications of tiles and stones on interior floor & exterior floor installations. It is a cementitious thin set powder to be mixed only with water to install various types of tiles & stone on a variety of substrates using the thin set method of installation.

Advantages:
  • Single Component, just add water
  • High bond strength
  • Economical & Easy to use
  • Bonds to various substrates
  • Exceeds EN12004 & ANSI 118.1

Suitable Substrates:
  • Concrete
  • Concrete Masonry Cement Mortar Beds
  • Cementetious Plaster and render
  • Brick Masonry
  • Cement Terrazzo

Properties:
  • Single Component
  • Opne Time – 15 Minutes at 27 deg C
  • Good Pot Life up to 3 hr 30 min at 27 deg
  • Time to heavy traffic – 24 hrs

Installation:
  • Surface Preparation –Surfaces should be structurally sound, clean and free of all dirt, oil, grease, loose peeling paint, laitance, concrete sealers or curing compounds. Dry, dusty concrete slabs or masonry should be dampened and excess water swept off.
  • Mixing –Place clean, potable water into a clean pail. Add thin set powder into the pail. Use approximately 5 – 6L of water for 20 kg of powder. Mix by hand or with a slow speed mixer to a smooth, trowel able consistency. Allow adhesive to slake for 5-10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel.
  • Application –Apply adhesive to the substrate with the flat side of the trowel, pressing firmly to work into surface. Comb on additional adhesive with the notched side. Use the proper sized notched trowel to ensure full bedding of the tile. Spread as much adhesive as can be covered with tile in 10 minutes. Back butter large tiles (> 12”x12”) to provide full bedding and firm support. Place tiles into the wet, sticky adhesive and beat in using a beating block and rubber mallet to embed tile and adjust the level. Check adhesive for complete coverage by periodically removing a tile and inspecting bedding adhesive transfer onto back of the tile. If adhesive is skinned over (not sticky), remove and replace with fresh adhesive. It is recommended to use spacers to create joints between tiles and subsequently fill the joints with Renafix tile grout.
  • Cleaning –Clean all tools and application equipment with water immediately after use. Hardened/cured material can only be removed mechanically.

Cautions:
  • Health & Safety Information
  • During cold weather, protect finished work from traffic until fully cured.
  • Contains Portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water.
  • Do not take internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas.
  • Keep out of reach of children.

Technical Data:
  • Shear Bond, Porcelain tile 28 day cure test by ANSI A118.4 – 1999:F-5.2.3 >240 psi(1.5 MPa)
  • Shear Bond, Porcelain tile Water Immersion test by ANSI A118.4 – 1999:F-5.2.3 >150 psi(1.0 MPa)
Request
Callback
Yes! I am Interested

Floor Tile Adhesive

Floor Tile Adhesive
  • Floor Tile Adhesive
Get Best Quote
Approx. Price: Rs 255 / BagGet Latest Price

Product Details:

Usage/ApplicationFloor and wall
ColorGrey
AdvantagesSaves time and increases labor productivity
FormPowder
BrandRenafix
Bulk Density1.2 - 1.6 Kg/litre
Water RetentivityMin 95%

Features :
  • Easy and Ready-to-use 
  • No need of water curing
  • Excellent bonding and low wastage
  • Saves time and increases labour productivity
  • Economical
Request
Callback
Yes! I am Interested
X

Explore more products



Reach Us
Sree Kala (Sr. Executive)
B. O. S. No. 26, Sri Ram Avenue, 100 Feet Extension
Coimbatore- 638115, Tamil Nadu, India



Call Us

Share Us

F GT L


Send E-mailSend SMS